eBay Classifieds » All ads » Jobs » Construction & trades » 

machine operator in Seattle

(1-20 of 23 ads)
View as:
Categories
  1. CARPENTER at University of Washington

    Operate hand and power equipment such as saws, jointers, lathes, sanders, planers, boring and mortising machines and other tools typical for the trade....

  2. CARPENTER at University of Washington Medical Center

    Operate hand and power equipment such as saws, jointers, lathes, sanders, planers, boring and mortising machines and other tools typical for the trade....

  3. Primary Heavy Equipment Operator I at Waste Management

    Primary Heavy Equipment Operator I. Now Hiring a Heavy Equipment Operator. Required to use motor coordination with finger dexterity (such as keyboarding,...

  4. TEMPORARY CARPENTER CANDIDATE BANK at University of Washington Medical Center

    May perform work in other trades; Operate power equipment such as saws, jointers, lathes, sanders, planers, boring and motising machines;...

  5. TEMPORARY CARPENTER CANDIDATE BANK at University of Washington

    May perform work in other trades; Operate power equipment such as saws, jointers, lathes, sanders, planers, boring and motising machines;...

    Ads
    1. PVC Film Machine Operator

      1. Monitor controls and settings for speed, air pressure, temperature, etc. (including Measurex readings) to ensure that everything is running in the same, orderly and consistent manner.2. Report immediately to the Lead any unusual observation(s) during the run, which may result in unwanted and deleterious effect on the finish product.3. Monitor quality of the rolls while these are running ...

    2. Warehouse Associate - 1st & 2nd Shift

      Valassis is a leader in intelligent media delivery, providing over 15,000 advertisers proven and innovative media solutions to influence consumers wherever they plan, shop, buy and share. By integrating online and offline data combined with powerful insights, Valassis precisely targets its clients’ most valuable shoppers, offering unparalleled reach and scale. We continue to harness the ...

    3. Oven Operator (Aerospace)

      AIM Aerospace Inc. Renton Operations is seeking an Oven Operator to work on 1st shift Monday-Friday 5:30am-2:00pm.Job Description: Operates oven machine using specification for curing process by performing the following dutiesResponsibilities Include:Load composite parts onto racks, trays or carts and pushes them into oven.Closes and open oven door and allows cores to bake for specified time ...

    4. Machinist III (Journeyman) - $25-$35/hr

      Currently seeking a contract Machinist (Journey Level III) Associate to assist our talented team of machining professionals.Pay: $25-$35/hr Depending on ExperienceShifts: Monday - Friday. The hours of the position are flexible and allow the associate to select five (5) eight (8) hour days or four (4) ten (10) hour days.Position Snapshot: The associate will perform a variety of machining ...

    5. CNC Milling Manager - Aerospace (Renton, WA)

      CNC Milling Manager - Aerospace Job Summary:A local aerospace firm is in need of a CNC Milling Manager for the Renton, WA location. The position reports directly to the General Manager. The shop is a modest size and has the highest quality machinists.The CNC Milling Manager will manage production jobs, taking parts from blueprint through completion with little or no supervision, interpret ...

    6. Machinist III (Journeyman) - $25-$35/hr

      Currently seeking a contract Machinist (Journey Level III) Associate to assist our talented team of machining professionals.Pay: $25-$35/hr Depending on ExperienceShifts: Monday - Friday. The hours of the position are flexible and allow the associate to select five (5) eight (8) hour days or four (4) ten (10) hour days.Position Snapshot: The associate will perform a variety of machining ...

    7. Final Assembler

      AIM Aerospace Inc. Renton Operations is seeking a Final Assembler to work on 1st Shift Monday-Friday 5:30am - 2:00pm.Job Description-Assembles aircraft interior structures made of various materials such as plastic, metal, composite, epoxy, fiberglass, partially or completely working at a bench or on the shop floor by performing the following duties;Audit Bills of Material (BOM) and assembles ...

    8. CNC Operator (Aerospace) 3rd Shift

      AIM Aerospace Renton is looking for an experienced CNC Operator to work on 3rd Shift, Sunday (7:30pm - 6:00am) and Monday-Thursday (10:30am-6:30am).JOB SUMMARY:Plans and performs a variety of machine operations utilizing numerical control machining centers to cut and/or shape work pieces to specificationsQualifications and experience:-Must have knowledge and operating experience of 3 axis ...

    9. Experienced Print shop Press and Bindery operator

      We are searching for employees who have 5 years experience or more working in the commercial printing industry. We are seeking a commercial press operator who has experience using two color and four color offset presses. Duties would include working with office staff to ensure jobs are set correctly, set-up and wash-up of press as well as continually ensuring product quality while running ...

    10. Aerospace CNC Lead Machinist / Swing Shift

      Aerospace CNC Lead Machinist / Swing ShiftJOB SUMMERYThis CNC machinist position is not an entry level position. The successful candidate will be operating multi-axis mills and/ or lathes with live tools and sub-spindles. Depending on experience, the position may require "CNC machine set-up" and "proving out" programs. In addition to operating and setting up machines, mentoring and ...

    11. Aerospace Grinder

      Aerospace GrinderJOB SUMMERYThe CNC/Manual aerospace grinder position is not an entry level position. The prospect will be operating CNC cylindrical, manual cylindrical, and centerless grinders while holding aerospace tolerances. The position also will include operating thread rollers. Depending on experience the successful applicant may "set-up" CNC machines and "prove out" programs or ...

    12. General Manager

      Located in Sumner, WA, we are a dynamic and growing fabrication & machining manufacturer and looking to add a key person to our Management Team.  We are an ISO/AS9100 certified company known for high-end precision machined parts for Aerospace, Defense, Medical, and Commercial Industries. We are a leader in quality, innovation and project engineering management.   The General Manager is ...

    13. Shipping/Receiving Specialist 3 Contract-to-hire 1st Shift $16.36

      US - Shipping/Receiving Specialist - Level 3 - Lifting 30lbs or less moderate machine operationRedmond, WA08/22/2016 to 04/21/2017***Candidates must have computer skills and be familiar of how to use a computer***1st Shift Contract-to-hireDescriptionConfirms and records the receipt of shipments, prepares items for shipping, and loads and unloads trucks. Reports damages and discrepancies for ...

    14. Pad Print Operator with Experience

       JOB DESCRIPTIONPad Print OperatorPosition Title: Pad Print Operator (with Experience) to work the 10:30am to 7pm shiftDepartment: ProductionReports to: Production ManagerCompensation: DOEPosition Description: This position requires excellent attention to detail, knowledge in pad printing procedures including color mixing, ink matching, cliché set up, and pad print machine operation. Manual ...

    15. Fabricator & Welder - Aluminum

      Our vessels help protect the lives of people serving their communities and their countries. Founded in 1997, SAFE Boats International (SAFE) designs and builds highly reliable and extremely durable vessels that help keep military, law enforcement and fire professional’s safe as they carry out their duties, protect citizens and work to save lives. Based just outside of Seattle, Washington, ...

    16. Industrial Maintenance Technician lV

      Seeking highly motivated Industrial Maintenance Technician to help SAFE Boats International with our overall equipment and machinery maintenance, upgrades and planning.Position Title: Industrial Maintenance Technician IVDepartment: Facilities MaintenanceReports to: Facilities Maintenance ManagerLocation: Bremerton, WAShift: DayCategory: Non ExemptTasks:Use tools ranging from common hand and ...

    17. Aluminum Welder

      Our vessels help protect the lives of people serving their communities and their countries. Founded in 1997, SAFE Boats International (SAFE) designs and builds highly reliable and extremely durable vessels that help keep military, law enforcement and fire professional’s safe as they carry out their duties, protect citizens and work to save lives. Based just outside of Seattle, Washington, ...

    18. Production Supervisor

      OBERTO BRANDSOberto Brands is a local meat snack manufacturing company located in the city of Kent, WA. We are looking for a Production Supervisor to join our manufacturing team on all shifts. PLEASE VISIT OUR WEBSITE AT WWW.OBERTO.COM/CAREERS TO APPLY DIRECTLY.POSITION SUMMARYThe Production Supervisor is responsible for leading, directing and being accountable for people and processes for ...

    19. Assembler

      10+ Month ContractPerforms manual or machine-supported filling, assembly, labeling, packaging and packing of company and 3rd party products.Assembles components in proper sequence using appropriate devices.Visually inspects assemblies for proper fit of components, operates test jigs, records readings or results.Manually fills or operates filling equipment for type of product and sizes of ...

    20. Welder - Fabricator

      WELDER\Fabricator Position:I have a great temp to hire, Redmond based, welding\fabricator position open for first shift 5:00 a.m. to 3:30 p.m. Mon. – Thurs.   Here are the details:Prefer a fabricator/welder w/residential railing experienceMinimum of 2+ years of welding/fabricating beams, columns, frames, brackets and architectural hardware.Knowledge of A36 Steel and other alloy ...

      1. Maintenance Technician II - Shoreline at CRISTA Ministries

        Sewer machine augur. CPO (Certified pool operator). Journeymen level card in a trade. Completion of trade school or apprenticeship program....

      2. Maintenance Technician II - CRISTA Shores at CRISTA Ministries

        Sewer machine auger. Completion of trade school or apprenticeship program. CPR / First Aid and CPO (Certified pool operator)....

      3. Primary Heavy Equipment Operator I at Waste Management

        Primary Heavy Equipment Operator I. Now Hiring a Heavy Equipment Operator. Required to use motor coordination with finger dexterity (such as keyboarding,...